Siding has a reputation as a simple and practical material for a reason. It’s really easy to put together. That’s why it’s so popular. If you consider all the processes carefully, you can understand that the assembly of panels somewhat resembles the assembly of the same designer.
Of course, attention, physical strength and some mathematical calculation are required here, but there is nothing supernatural about it. When performing any construction work, you will need similar qualities.
Wall cladding is carried out using frame technology. Their insulation is also combined with this process. We will now consider the algorithm of actions, which will allow you to properly sheathe the house with siding with insulation in a short time.
Stages of work:
- Prepare the surface, clean it, and plan the future structure.
- We form the supporting elements of the frame.
- Install a vapor barrier.
- We fill the gap between the frame elements with insulation.
- Lay the waterproofing film.
- We mount the basement profiles.
- We cover the windows with siding panels.
- We install corners, eaves and all additional elements.
- Lay the siding panels.
- We complete the installation by checking the entire system.
All actions must be performed in a strict sequence. It is advisable not to neglect safety and make sure that you are doing everything correctly.
Nuances in work
The technology of work here is quite simple, but there are still some nuances and they must be taken into account.
First of all, you need to determine which house you should work on. This is necessary to determine the appropriate material for the frame.
If you are going to finish the surface of the walls of a wooden house, then the frame will be wooden. However, a wooden frame is not suitable for a brick or concrete structure. Here it is strongly recommended to use only metal solutions. For example, aluminum guides.
The frame is assembled so that it is very strong. Do not forget about the installation of transverse panels, they will help stabilize the entire system, make it more stable and reliable.
In addition, the insulation that will be performed after the installation of the frame is also a rather serious process. The heater can weigh tens and hundreds of kilograms.
You need to make sure that the structure can withstand the pressure and pressure from its weight.
The technology used to insulate the frame is also quite simple. You only need to fill the holes between the insulation elements. It is necessary to fill it qualitatively, so that there are no bridges of coldness and other defects.
First, it is recommended by siding contractor kansas city to insulate with plates. Exceptions are only liquid heaters. They have a rather specific structure and do not need such solutions.
Installation of plates is carried out on glue, additional fixation takes place due to the fastening of elements to the frame. Do not spare dowels or other fasteners that can provide reliable stabilization of the structure.
The better you fix everything, the more confidence you will have in tomorrow. The easiest way to insulate a brick house is with a galvanized frame. If desired, the insulation elements can be attached even to its structure itself.
Peculiarities of fixing the siding
The panels themselves are assembled in the form of a constructor. Each panel has grooves for attachment to the next. It is very important to come up with a scheme in your head in advance, according to which the entire installation will be carried out.
And even more than that, it will not be superfluous to draw up a full-fledged drawing. It will immediately make it clear how many materials you need, where and when.
Then they begin the assembly itself. Fastening the siding elements is not difficult. All you need is to position the panel correctly and fix it with a nail or screw.
But remember, decorative elements are always installed first, and then they are already accepted for the direct assembly of the facing layer.
That is, first they mount all kinds of profiles, corners, cornices, etc. And after completing all these procedures, it remains only to start installing the panels themselves. Here, the entire process follows the instructions. You just need to choose the right panel and securely fix it with fasteners and latches.